Logging In With the Cisco AnyConnect Client and Duo Security

Logging In With the Cisco AnyConnect Client

You'll see a “Second Password” field when using Cisco AnyConnect client.

Use the "Second Password" field to tell Duo how you want to authenticate. Here's how:

Type...To...
A passcode Log in using a passcode, either generated with Duo Mobile, sent via SMS, generated by your hardware token, or provided by an administrator.
Examples: "123456" or "1456789"
push Push a login request to your phone (if you have Duo Mobile installed and activated on your iPhone, Android, Windows Phone, or BlackBerry device). Just review the request and tap "Approve" to log in.
phone Authenticate via phone callback.
sms Get a new batch of SMS passcodes.
Your login attempt will fail — log in again with one of your new passcodes.

You can also add a number to the end of these factor names if you have more than one device registered. For example, push2 will send a login request to your second phone, phone3 will call your third phone, etc.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Please sign in to leave a comment.